Onze Nieuwsbrief


Syrp Genie

Grotere weergave

RRP:
EUR 949,00
Uw prijs:
EUR 799,00 (inclusief 21 Procent BTW) (U bespaart EUR 150,00)
Artikelnr.:
SY-GEN1
Merk:
Verzendkosten:
Bepaald bij afrekenen
Link Cable:


Product Omschrijving

 

Genie

 


The Genie! A simple, affordable and extremely easy to use device used for motion control and image capture for Time Lapse Photography + more.

The key to the Genie is that it can be used with any existing film equipment apparatus on the market including Tripods, Sliders, Jib Arms, cable cams or even your office chair!

Genie-sun600.jpg

The Genie Motion Control Time Lapse Device from Syrp is your key to the creative world of time lapse photography or real time video. The 10 cm cube takes up very little space in your bag and at only 1.4 kg it's easy to make it part of your standard rig.

The Genie, which allows both panning and linear motion control, attaches to standard gear such as dollies, sliders, jib arms and tripods. Simply attach the panning accessory to your tripod or support and mount your optional camera and ball head to the tapped female receiver atop the Genie. The weight of your equipment is rarely a concern since it supports up to 44 lb. An illuminated bubble level is built in to help in setting up for panoramas. The Genie has factory presets such as Stars, People or Clouds but you can enter an unlimited amount of user presets into the Genie's memory for custom work. At maximum panning speed a 360° pan takes 5 seconds, while 39" of linear movement takes 23 seconds.

Linear time lapse can be done on a rail or on a linear support system of your own making. While the Genie comes with 3m of rope to pull it across the rail, the movement of your time lapse is only limited by the length of your rope. Kevlar-cored rope with lengths of 328', 164' or 32.8' are available for separate purchase. The Genie has been tested successfully on a homemade 60' dual cable stretched over a lake.

Inputs include both USB for firmware and a sensor input. The free firmware upgrade enables ramp-in, ramp-out functions and HDR (High Dynamic Range). Ramping is the process of modifying exposure settings on a camera in order to maintain a desired exposure value while the camera is in Bulb mode. This is especially valuable for transitional day into night, or night into day time lapses.

The sensor input accepts a motion, light, sound or other type of sensor to start your program in response to specific stimuli. The Genie ships with both panning and sliding bases, two slider mounts, 9.85' of rope and a multi-voltage charger for its built-in battery. A three-hour charge gives you about 12 hours of run time, depend on the weight of your camera. The Genie is compatible with approximately 130 cameras from nine major brands.

Dual Motion

Panning and linear motion control with one device

Versatile

Attaches to any existing film equipment i.e. Dolly, Slider, Jib Arm etc.

Sensor Input

Auto start function through a timer or sensor or both. Sensor input allows for attachment of a motion sensor, light sensor, sound sensor and more

Preview

Preview function allows for revision of recording movement prior to recording

Pre-Sets

Factory pre-sets allow for instant shooting straight out of the box or storable user-programmable panning and tracking pre-sets

Auto Start and Power Saving

Auto Start enables the user to program camera movements to return to "home" and repeat again or continuously run the same movement. It also enables the user to setup time-lapse or camera movement to start on a delay timer. Auto Power Off shuts down the Genie when it's unused for 1 hour to save battery power

Leveling

Bubble level with light

Ramping Firmware

Bulb ramping is the process of modifying exposure settings on a camera in order to maintain a desired exposure value while the camera is in Bulb mode. A free firmware upgrade allows ramp-in, ramp-out function and HDR. Current version: 1.1.9

 

Genie - Motion Control Time Lapse Device from Syrp on Vimeo.

 

Battery Life
12 hours run time - based off a timelapse recording running for 12 hours straight on a horizontal track. Note: Battery life will vary according to other factors, such as how much weight is used on the device, whether it's used in time lapse or video mode and whether the Genie is being used for moves on an incline.

Battery

  • Li-ion 11.1V
  • Charge time 3 hours
Power Supply
  • Input 240/110 50/60hz AC
  • Output 15V 1.5A DC

Tutorial - What's in the box from Syrp on Vimeo.

 

Package Contents

  • 1 x Genie
  • 1 x Panning Mount
  • 1 x 3 m High Performance Rope
  • 1 x International Wall Charger
  • 2 x Slider Mounts
  • 4 x Slider Straps
  • 1 x User Guide
  • 1 x Free Link Cable (Choice :Nikon, Panasonic, Sony, Canon, Olympus)
Dimensions :
  • L 102 mm
  • W 102 mm
  • H 102 mm

 

Link Cable Compatibility :

1C - Canon
EOS 1100D |1000D| 650D| 600D |550D | 500D| 450D | 400D | 350D | 300D | 300V | 300 | 70D | 60D | 60Da | 50E | 50 | 33 | 30 | 3000

3C - Canon
EOS 7D | 50D | 40D | 30D | 6D | 5D | 20D | 10D | 5D Mark III | 5D Mark II | 1D X | 1D C | 1D Mark IV | 1D(s)Mark III | 1D(s)Mark II(N)

1N - Nikon
D800E | D800 | D700 | D300s | D300 | D200 | D4 | D3X | D3

2N - Nikon
D80 | D70s

3N - Nikon
D7000 | D5100 | D5000 | D3200 | D3100 | D600 | D90

1S- Sony
A900 | A850 | A700 | A580 | A550 | A500 | A450 | A350 | A300 | A200 | A100 | A99 | A77 | A65 | A57 | A55 | A35 | A33

3L - Olympus
E620 | E600 | E520 | E510 | E450 | E420 | E410 | EM5 | EP3 | EP2 | EP1 | E30 | E3 | SP-570UZ | SP-560UZ | SP-550UZ | SP-510UZ

1P - Panasonic
DMC-FZ20 | DMC-FZ30S | L1 | GH1 | GH2 | GH3 | GH4 | DIGILUX3 | DMC-FZ20k | DMC-FZ50K | DIGILUX2 | DMC-GF1 | DMC-FZ100 | DMC-FZ20S | DMC-FZ50S | DMCG2 | DMC-FZ30 | DMC-FZ50 | L-10 | DMC-G3 | DMC-FZ30K | LC-1 | DMC-G1 | DMC-G10

 

 


Zoek vergelijkbare artikelen in dezelfde artikelgroep


Gerelateerde Artikelen

Gerelateerde Artikelen

Voeg toe aan Wenslijst

Klik op onderstaande knop voor het toevoegen van Syrp Genie aan uw wenslijst.

U heeft recent bekeken...