Tel. 085-3035623

Welkom bij Videobewerken !


Teradek COLR Duo Camera Control Bridge/LUT Box

Supports 2 x Separate 3D LUTs
2 x Configurable Independent SDI Outputs
Wireless Ethernet & USB Camera Control
Integrates with Pomfort LiveGrade Pro
Supports 10-Bit Color
RAW & Log Signal Conversion
Works with FoolControl for RED Cameras
Part of Teradek Connected Set Workflow

Artikelnummer: TER-COLRDUO
Stuur e-mail wanneer dit product weer op voorraad is.

Levertijd: Op bestelling

Excl. BTW: € 1.490,00 Incl. BTW: € 1.802,90



Teradek COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.

Looks Mean Everything
During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

Works with Pomfort LiveGrade
COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

Monitor Calibration with SpectraCal
Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

Connected Set
With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.

Extra informatie

Extra informatie

Merk Teradek
Artikelnummer TER-COLRDUO



Video Input 1 x 3G/HD/SD-SDI BNC
Video Outputs 2 x 3G/HD/SD-SDI BNC
Audio Input/Output Embedded SDI audio
Supported Video Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60
1080i 50/59.94/60
1080PsF 23.98/24/25
720p 50/59.94/60
576i 50
480i 59.94
Color Sampling SDI Input/Output: 10-bit YCbCr 4:2:2
Video Processing Test pattern generator for calibration
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
2 x Video outputs with two independent LUT pipelines each
Protocol Support Network Protocols: TCP/IP, UDP, HTTP, DHCP
Software/Platform Integration: Pomfort LiveGrade, SpectraCal CalMAN, and more
Interfaces HTTP: WebUI for configuration and control
Configuration Interface: OLED display/joystick navigation
Switches: On/Off
USB Interface: Powered USB 2.0 host port
Network Ethernet: 10/100/1000 BASE-T Gigabit
Wi-Fi: 2.4/5 GHz 802.11 ac/a/b/g/n MiMO
RF Channel Selection/3-Mode Auto: 2.4 or 5 GHz, Auto (2.4 GHz only), Auto (5 GHz only)
Configurable to specific channels
Power 2-pin LEMO power input
Nominal Power Consumption: 8 W, 7 W (no Wi-Fi)
Auxiliary Power Input: 6-28 VDC
Dimensions 5 x 3 x 10 cm
Weight 170g


Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren