Tel. 085-3035623

Welkom bij Videobewerken !

Zacuto Z-Finder Pro 2.5x

The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning.

Artikelnummer: Z-FIND-PRO2
Stuur e-mail wanneer dit product weer op voorraad is.

Levertijd: 1-2 werkdagen

Excl. BTW: € 305,02 Incl. BTW: € 369,07

Details

Details

The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against Zacuto's comfy, large eyecup. The Z-finder Pro 2.5x comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. This is the model Zacuto uses with the electronic viewfinder packages. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly far sighted (wear strong reading glasses) or are just looking for the biggest magnification possible we recommend the Z-Finder Pro 3x.

The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to Zacuto's DSLR Baseplate. ) The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Plate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

PLEASE NOTE

1.All Z-finder bodies are the same size and can fit on any of Zacuto's frames. The Z-Finder Pro 2.5x comes standard with a 3” Z-Finder Mounting Frame for Small DSLR Bodies. That will fit a standard small body DSLR with a 3” screen like the Canon 5D MII, 7D, T3i or the Nikon D3000 or D5100. Any other frames need to be purchased in addition to the Z-Finder. 

2. The tapped holes on the bottom of the Gorilla Baseplate are offset from the center of the lens for use with some of Zacuto's equipment. This is only a concern if you are using the Gorilla plate with other rigs that do not have side to side movement and need the matte box in line with the lens/mounting screw hole. To compensate for this issue, you can either use an adhesive mounting frame to attach the Z-finder or add a Gorilla Plate Adapter to your plate. The Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. Please note that this adapter does come with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

3.The Gorilla Baseplate covers the battery compartment door on the Canon T2i/3i/4i Camera. If that is a problem, we suggest using the adhesive frame.

4.In order for the Gorilla Plate and mounting frame to correctly align with the LCD screen the plate needs to be directly underneath your camera. This means it cannot be used in combination with L brackets like Really Right Stuff or camera specific contour plates like Arca Swiss. You can use an adhesive frame on your camera with Zacuto's Z-Finder and continue using your camera specific plates as usual.

5. Panasonic LUMIX Notes: A Z-Finder packaged with a mounting system for the GH3/GH4 is also available.

The Z-Finder Pro 2.5x includes:

  • Z-Finder Pro loupe with 2.5x magnification and diopter
  • Three (3) Extender Frames
  • Gorilla Plate V2 and 3” Mounting Frame for Small DSLR Bodies (Canon 5D M2/7D/60D-Nikon D300/D90/D7000 type cameras)
  • Lanyard and Lanyard Hook
  • Lens Cap, Sun Mask, and protective boot
  • Z-Finder Dust Cover
  • One installed and one additional Anti-Fog disc. This also acts as a lens protector and is expendable.

 

WARNING The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid direct sun light. Proper use of the included lens cap and sun mask will dramatically reduce but not eliminate risk.

Extra informatie

Extra informatie

UPC-EAN 654367035931
Merk Zacuto
Artikelnummer Z-FIND-PRO2

Beoordelen

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren